You’ve waited all day for this moment… You’ve finally settled into a comfortable position in front of the television to unwind and rest. But guess what? The remote control has decided to spoil your evening. You’ve pressed every button and there’s nothing you can do; she refuses to obey you. What a catastrophe! You don’t know whether to laugh or cry anymore.

But one thing is certain: it is not time to give up; whether you like it or not, everything will work out in the end! And we intend to make things easy for you. Here are several approaches to resolving the issue without being upset. Sitting in front of the television to zap or watch your favorite show is a moment of respite after a long day of work. So, obviously, when the remote control begins to malfunction or simply refuses to work, there is something to be unhappy about.

First, let us breathe softly and remain calm. Because rage does not fix anything. Instead, you should think carefully to find the source of the problem. And this is even though your match is slated to begin in 10 minutes! Often, the explanation is not evident. This unexpected blockage can be attributed to a variety of causes. The good news is that the answer is generally rather easy. These are the alternatives open to you.

Check the batteries in the remote control. It may appear insignificant to you, but it is typically merely a flat battery. If the battery is low, the controls will stop responding. So, before you do anything else, be sure of this. Then remove the batteries and replace them. If you don’t have any spare batteries, you may have to turn them upside down. However, if the problem persists, there is another alternative to consider.

Test your batteries on a different device. Do they work properly? So, return to the remote control compartment and do some cleaning. Sometimes the dirt is to blame and prevents contact. Use a cotton ball dipped in a liquid substance designed for this type of electronic equipment. Normally, the issue will be resolved!Is your remote control more temperamental than you realized?

If the battery change was not perfect, now is the time to test the signal. Most models are infrared remote controls. Technically, a similar light-emitting diode is mounted on the front and transmits an unseen signal to the television. But how can you tell whether it’s there? Don’t worry, the maneuver is really straightforward. Take your smartphone and switch on the camera. Point it directly at the LED strip on the front of the remote, which is visible due to the semi-transparent plastic.

Press any button on the remote, and if it sends a signal, the LED will light up or flash. If you don’t notice any flashes, the remote control isn’t sending any signals. What to do if the remote control refuses to function? So, how can you get out of problems if replacing the battery does not work? Don’t worry, we won’t leave you in this mess; there are alternative solutions to consider. Starting with this:

Gather the remote control, a pencil, pliers, and a pencil sharpener. Sharpen your pencil carefully. And cut a portion of it, attempting to cut the same length as a stack.
Sharpen it with a utility knife to get an extremely sharp point. Then, using pliers, remove the upper half of the positive side of the old battery, allowing you to place it into the “fake” battery more easily. It is a little, concave bit of metal.

Then, gently insert the new battery, with the little piece on the positive side. Place the battery next to it and see if the remote works. Normally, this approach should work because it has been proven before. But be careful; this is only a temporary trick. Sure, you’ll save your batteries for a few days, but it’s best to resolve the issue permanently as soon as possible.

Do you dislike waste? Before you toss away your remote control or spend money on a new one, try fixing the old one first using the approach outlined below. Open the remote control. To do this, use a thin knife to pull the housing shell sideways, or unscrew the small screws in the battery compartment. Then inspect the remote and circuits for dust or debris. The conductive rubber contacts or mat can become filthy quickly. If that’s the case, it’s time for some cleaning!

Prepare a solution of water and spirit vinegar. Moisten a clean cloth (ideally a soft microfibre) with a small amount of this liquid. Warning: Never pour vinegar or water directly onto the contacts or rubber component! Now dab this region with gentle pressure on the contact points and electronics. Finally, leave the remote to dry completely before reassembling it. Logically, once fully cleaned, it should be functional again!